Our services include deep cleaning, stripping old finishes, applying new coatings, buffing, and spot removal of scuffs and stains, all tailored to your floor type and condition.

 The frequency depends on your facility’s foot traffic, usage, and floor type, but generally, we recommend professional deep cleaning and maintenance at least quarterly to keep floors looking their best and extend their lifespan.

 Our services primarily focus on cleaning and refinishing. Minor scuffs can often be removed or minimized. Deep scratches or gouges may require plank/tile replacement, which is typically outside the scope of routine maintenance but we can advise.

This depends on traffic. High-traffic commercial areas in Nashville, Knoxville, or Chattanooga might need it every 6-12 months, while lower-traffic areas might go 1-3 years. Regular buffing can extend the time between strip and wax cycles.

 Generally, LVT/LVP has a urethane protective wear layer and does not require traditional waxing like VCT. However, it benefits from professional deep cleaning and may sometimes have specific manufacturer-recommended sealants or top dressings for added protection or sheen restoration. We assess this on a case-by-case basis..

Both are used to restore gloss to floor finishes. Buffing typically uses a lower speed machine and can clean while polishing. Burnishing uses a very high-speed machine to heat and harden the finish, creating a "wet look" shine. 

We recommend allowing several hours for the finish to cure before allowing foot traffic, and ideally 24 hours before moving heavy furniture back.